Parts and Accessories At Great Prices!

  • Most parts and services are in stock and ready to ship
  • Proven success with over 25 years in the emission control industry!
  • Direct fit designs for fast and hassle-free installation
  • Achieve full compliance with OSHA, CARB, EPA, RICE and other regulations
  • Fastest shipping lead-times across USA and Canada
  • We will match & beat any written competitors quote - guaranteed!
Call For a Quote:1-800-551-5525
"The ordering was easy, and the shipping was very fast."J. Rutley, Rutley Rentals, Grand Rapids, MI
"Great products at very competitive prices. Will definitely use your company again!"Tomas Hunn, Hunn Engineering & Co. Oklahoma City, OK
Request a Quote

We value your privacy. Your information will never be sold or shared.

Call For a Quote:1-800-551-5525 or send an email request:
Request A Quote
Parts and Accessories

Firwin Insulation Blankets

General Properties
Insulation – 100% Glass Fibres
Temp. Limit - 1200°F (650°C)
Weight – 1” Blanket – 1lb./sq.ft.
25mm Blanket – 5kg/sq.m

Thermal Conductivity
300°F - 0.27 BTU/In/Hr/ft/°F
150°C – 0.039 watts/mk
500°F – 0.41 BTU/In/Hr/ft/°F
260°C – 0.059 watts/mk
700°F – 0.52 BTU/In/Hr/ft./°F
370°C – 0.075 watts/mk

Non-Combustible
Special Higher Temperature constructions with alternative materials available on request to temperatures of 2000°F (1100°C)

Application Standards

  • MIL-I-16411 Type II and MIL-I-24244
  • Conforms to Coast Guard Spec for incombustible materials 164.009
  • Meets UL requirements
  • CSI Accepted

Typical Dieseltech Blanket Construction

A – COLD FACE
Indoors – Aluminum coated fiberglass cloth
Outdoors – Silicone impregnated fiberglass cloth

B – INSULATION
Below 640°C (1200°F) “E” Type fiberglass Matt
Above 640°C (1200°F) Ceramic Fibre Matt

C – HOT FACE
Stainless Steel Knitted Mesh

D – CAPSTAN RIVETS
Fastened through Cold Face only
Laced up with S.S Lacing wire

E – HIGH TEMP. SEWN CONSTRUCTION

Diesel Tech Blankets
Firwin Diesel Tech Exhaust Insulation Blankets are custom manufactured using layered fiberglass materials to provide exceptional heat and noise control at temperatures to 2000°F (1100°C)

Firwin Diesel Tech blankets are ideal for use on equipment that has to be periodically overhauled or maintained.

Diesel Tech exhaust blankets will withstand intense vibration and is the solution for block type insulation requiring replacement.

Applications

  • POWER GENERATION - MARINE TRANSPORT
  • FISHING VESSELS - FIRE PUMPS
  • FORESTRY & MINING EQUIPMENTS

On such equipment as

  • EXHAUST MANIFOLDS - EXHAUST PIPE
  • EXPANSION JOINTS - FLEXIBLE CONNECTIONS
  • TURBOCHARGERS - TURBINE CASES
  • EXHAUST GAS BOILERS

Advantages

  • ASBESTOS FREE
  • REMOVABLE/REUSABLE
  • VIBRATION RESISTANT
  • PERSONNEL PROTECTION

Blankets can lower touch temperatures to acceptable safety levels.
Reduce uncomfortable ambient temperatures.
Allow routine maintenance without shutdown.

Fire Protection
Reduces hazards of flammable fluid ignition, resulting from leaks and spills contacting surface temperatures of running equipment.

Noise Control
On application, blankets can be constructed to effect optimum thermal and/or acoustical requirements.

High Temperature

Removable Insulation Blankets

Cover Purifiers
FIRWIN CORP manufactures custom purifier wraps designed exactly to each purifier. This ensures a close, tight fit. We select the materials specifically to suit a particular application and operating temperature. Our lacing anchors do not penetrate the entire blanket, thus the lacing anchors conduct no heat away from the purifier, and importantly do not heat up and become a burn hazard.

These blankets have been successfully used on trucks, special machinery and busses. Through our experience we know that our blankets:

  • HELP MAINTAIN PURIFIER OPERATING TEMPERATURE
  • PREVENT EXCESSIVE HEAT FROM DAMAGING SURROUNDING CONTROLS
  • SPEED UP HEATING TO OPERATING TEMPERATURE
  • PREVENT ACCIDENTAL BURNS ON EXPOSED PURIFIERS
  • REDUCE ENGINE COMPARTMENT TEMPERATURES
  • HAVE AN OIL RESISTANT SILICONE IMPREGNATED FIBERGLASS OUTER COVER

All our materials are carefully selected to maintain the best quality. These materials are NON-COMBUSTIBLE and CONTAIN NO ASBESTOS. The specification on the insulation blankets are rigorous, and they comply with Lloyds of London, DNV, and the U.S. and Canadian Coast Guard specifications.

Call For a Quote:1-800-551-5525 or send an email request:
Request A Quote
Contact

Toll free:1-800-551-5525

Fax:905-799-9771

Email:sales@catalyticexhaust.ca

Address:30 Intermodal Drive,
Units 19-22, Brampton,
Ontario, Canada L6T 5K1